Oracle FAQ | Your Portal to the Oracle Knowledge Grid |
Home -> Community -> Usenet -> c.d.o.server -> Re: Oracle 9i rac with AIX Hacmp
ORA600 wrote:
> Hi Dax,
>
> I don't have any scripts that i can send you. unfortunately, i don't
> have a cluster at this moment to check anything. you really do need
> Metalink access is what i feel.
>
> the problem could be a simple permissions issue on the shared disks or
> the srvm_config device or it could be that you are missing some OS
> patch (APAR).
>
> are you using RAW volumes or GPFS?
>
> are you following some documentation to install? you have to create and
> set the dba groups and permissions correctly, i suppose you are doing
> all this correctly.
>
> when you start installation of Oracle, it will prompt you to run the
> "pre check" script. That has to be downloaded from Metalink. One of
> them is installPrep.sh and the other one that is mandatory is
> "rootpre.sh" which the OUI prompts you to do anyway.
>
> the nearest bug i could find is Bug: 2752048 and that is apparently a
> vendor issue (IBM) and moreover, this was HACMP version 4.5. you say
> you are using HACMP 5.2.
>
> Metalink also says you may need to set the env variable,
>
> export LDR_CNTRL=MAXDATA=0x50000000
>
> But, this may not be applicable to HACMP 5.2 or AIX 5.3. Check with IBM
> if this is required.
>
> Hope that might give you some clues.
>
> cheers
> anand
Anand,
Now cheers i resolve this problem thru LDR env. variable which u give me.
It also work with 5.2 HACMP
Thanks once again
Dax Received on Wed May 31 2006 - 06:09:33 CDT