Re: Oracle 9i rac with AIX Hacmp

Ah, that sounds good.

Good Luck!

cheers
anand

Dax wrote:
> ORA600 wrote:
>
> > Hi Dax,
> >
> > I don't have any scripts that i can send you. unfortunately, i don't
> > have a cluster at this moment to check anything. you really do need
> > Metalink access is what i feel.
> >
> > the problem could be a simple permissions issue on the shared disks or
> > the srvm_config device or it could be that you are missing some OS
> > patch (APAR).
> >
> > are you using RAW volumes or GPFS?
> >
> > are you following some documentation to install? you have to create and
> > set the dba groups and permissions correctly, i suppose you are doing
> > all this correctly.
> >
> > when you start installation of Oracle, it will prompt you to run the
> > "pre check" script. That has to be downloaded from Metalink. One of
> > them is installPrep.sh and the other one that is mandatory is
> > "rootpre.sh" which the OUI prompts you to do anyway.
> >
> > the nearest bug i could find is Bug: 2752048 and that is apparently a
> > vendor issue (IBM) and moreover, this was HACMP version 4.5. you say
> > you are using HACMP 5.2.
> >
> > Metalink also says you may need to set the env variable,
> >
> > export LDR_CNTRL=MAXDATA=0x50000000
> >
> > But, this may not be applicable to HACMP 5.2 or AIX 5.3. Check with IBM
> > if this is required.
> >
> > Hope that might give you some clues.
> >
> > cheers
> > anand
>
>
> Anand,
>
> Now cheers i resolve this problem thru LDR env. variable which u give
> me.
>
> It also work with 5.2 HACMP
>
> Thanks once again
>
> Dax
Received on Wed May 31 2006 - 06:19:29 CDT