Re: oem 12c on hp-ux pa-risc 11.11
Date: Mon, 5 May 2014 08:53:58 +0100
Message-ID: <CAP=5zEgZBC4ESAt=pkPKz3UZ9qYQr0QCP4XbNWMiv9RdZ+ENVA_at_mail.gmail.com>
I just read that back and what I was saying was unclear.
So we had a 12c agent on box A monitoring an instance on box B...
As I said, long time ago and I didn't write down what I did, so it officially does not exist. :)
Cheers
Tim...
On Mon, May 5, 2014 at 8:42 AM, Tim Hall <tim_at_oracle-base.com> wrote:
> Correct me if I'm wrong, but isn't it possible for an agent to monitor
> some aspects of a remote system? I'm sure we did this under 12c once for an
> old system that had not been upgraded yet. It was a while ago and they
> system has been upgraded now, so I don't have anything to refer back to, so
> my memory could be failing me... :)
>
> Cheers
>
> Tim...
>
>
> On Mon, May 5, 2014 at 8:12 AM, Peter Sharman <pete.sharman_at_oracle.com>wrote:
>
>> No it will not work. Pre-12c agents cannot communicate with a 12c OMS.
>>
>>
>>
>> Pete
>>
>> [image: Oracle logo]
>>
>> Pete Sharman
>> Principal Product Manager
>> Enterprise Manager Product Suite
>> 33 Benson Crescent CALWELL ACT 2905 AUSTRALIA
>>
>> Phone: +61262924095 | | Fax: +61262925183 | | Mobile: *+61414443449
>> <%2B61414443449>*
>> ------------------------------
>>
>> "Controlling developers is like herding cats."
>>
>> Kevin Loney, Oracle DBA Handbook
>>
>>
>>
>> "Oh no, it's not, it's much harder than that!"
>>
>> Bruce Pihlamae, long term Oracle DBA
>> ------------------------------
>>
>>
>>
>> *From:* max scalf [mailto:oracle.blog3_at_gmail.com]
>> *Sent:* Sunday, May 4, 2014 6:17 AM
>> *To:* oracle-l_at_freelists.org
>> *Subject:* oem 12c on hp-ux pa-risc 11.11
>>
>>
>>
>> Hello List,
>>
>>
>>
>> I have a question and maybe some of you guys are already doing this(or
>> not). We have some old HP-UX PA Risc(11.11) and i want them monitored with
>> our new OEM 12c(12.1.0.3). Looking at the certification matrix looks like
>> 11.11 is not supported with the 12c agent.
>>
>>
>>
>> I have one thing i have done in the past, where i wanted to monitor our
>> old pa-risc(11.11) box from Grid control version 11.1.0.7. I was unable to
>> deploy 11g agent as well(due to support issue, pa-risc 11g agent only
>> supported pa-risc 11.23 and 11.31). So as a worked around I deployed
>> 10.2.0.5 agent on that old pa-risc 11.11 box and got it connected to 11g
>> grid control.
>>
>>
>>
>> Most of these old box run DB version 10.2.0.4 or 10.2.0.5. I am not sure
>> if i can still do this with OEM 12c? where i can either re-deploy(or point
>> them to 12c OEM) 10.2.0.5 agent on these old 11.11 box. Obviously i am
>> sure you guys are probably asking why are you asking here, why not just try
>> it and find out yourself as you have already done this before.
>>
>>
>>
>> That's were i am stuck. Our team/Management do not want me to do that
>> and they are okay with using 2 different OEM(11g grid of all these old box
>> and 12c for newer version). I think if we can make this work, then we do
>> not have to deal with 2 different OEM versions and everything will be under
>> one umbrella.
>>
>>
>>
>> I just wanted to post this out here and see what people have to say, so
>> at the least i can point our team/management to right direction.
>>
>>
>>
>> Is anyone monitoring there old hp-ux pa-risc 11.11 box with OEM 12c, if
>> so what are you doing?
>>
>>
>>
>> Any pointers would be appreciated.
>>
>
>
-- http://www.freelists.org/webpage/oracle-lReceived on Mon May 05 2014 - 09:53:58 CEST