Oracle FAQ | Your Portal to the Oracle Knowledge Grid |
Home -> Community -> Usenet -> c.d.o.misc -> Re: Oracle DBA's should know this problem... HELP!!!!!!!!
Those so-called tcp-ip protocols you installed from Oracle cd, are not
network protocols but Oracle protocol adapters. You still have to
install the tcp-ip protocol stack (if it is not already installed). You
can check this out, if you click the network icon on control panel.
There you should see amoung the other things properly configured tcp and
ip protocols. If they don't exist (which, I think, is the case here) you
have to install them from M$ Windows cd.
"N. Steffens" wrote:
>
> I keep getting the following errors when I try to start up
> tnslsnr80
>
> also when I try to do it through lsnrctl80> START
>
> Errors:
> TNS-12560: TNS: protocol adapter error
> TNS-00530: protocol adapter error
> 32-bit windows error: 50: Unknown system error.
>
> I have TCP-IP protocol installed (there were 2 on my Oracle 8 cd)
>
> TCP-ip 2.xxxxx and TCP 8.xxxx
>
> tried both... but nothing working.......
>
> Please help!!!!
>
> Rao Ramineni heeft geschreven in bericht
> <37B8629A.F7A75180_at_alliedtours.com>...
> >We had similar problems when we tried to use Developer/2000 with Oracle
> 8.x.
> >
> >For some reason (known to Oracle only) Developer/2000 uses sqlnet 2.3 where
> as
> >Oracle
> >8.x uses Net8 as the standard mechanism to connect to database.
> >
> >Resolve this as follows.
> >
> >1. copy "TNSNAMES.ORA" file to orawin95\network\admin\ directory.
> >
> >2. Configure listener process of Net 8 by specifying the configuration
> >information
> > in orawin95\net8\admin\listener.ora file.
> >
> >3. Start listener program by executing tnslsnr80.
> >
> >Now you should be able to connect to the Database if your tnsnames.ora file
> >specifies
> >the correct connect-string, protocol, and Database SID.
> >
> >
> >
> >"N. Steffens" wrote:
> >
> >> I sure hope someone can help me (and some
> >> others for I have seen that more (newbe's) have the same problem.
> >>
> >> I have: Personal Oracle 8 & Developer 2.1 installed.... It all installs
> >> great without any problem.
> >>
> >> PLSQL works great with standard SCOTT/TIGER uid.
> >> But when I tried to start up Forms builder it just doesn't connect to my
> >> standard Oracle DB.
> >>
> >> I have copied my TNSNAMES from orawin95\net80\admin to
> >> orawin95\network\admin (at advice from someone) but that still doesn't
> help.
> >>
> >> I tried TNSPING to BEQ-LOCAL but it also gives an error while TNSPING80
> >> BEQ-LOCAL works great.
> >>
> >> Can U please help me?
> >> I've tried it on both WIN 98 and WIN 95..
> >>
> >> thanks in advance,
> >>
> >> Niels Steffens.
> >
--
Ilusat suve...
\ | / \ | / -----( )----- / | \ / | \
...ja päikest :)
Juku Received on Tue Aug 17 1999 - 08:58:37 CDT