Re: Oracle RAC DR test
From: Sanjay Mishra <smishra_97_at_yahoo.com>
Date: Thu, 12 Dec 2013 13:05:32 -0800 (PST)
Message-ID: <1386882332.36335.YahooMailNeo_at_web122101.mail.ne1.yahoo.com>
Has anyone tried the process for clone.sh and can share the experience. I am also working to create 11g R2 RAC on VBox to try the process before document the steps and so want to check if anyone has used and found/share his experience. Thanks Sanjay On Thursday, December 12, 2013 3:46 PM, "MacGregor, Ian A." <ian_at_slac.stanford.edu> wrote: Done. Please submit future requests as an RT ticket. Thank you Ian -----Original Message----- From: oracle-l-bounce_at_freelists.org [mailto:oracle-l-bounce_at_freelists.org] On Behalf Of Guenadi Jilevski Sent: Thursday, December 12, 2013 12:35 PM To: smishra_97_at_yahoo.com Cc: Freek.DHooge_at_uptime.be; nassyambasha_at_gmail.com; oracle-l@freelists.org Subject: Re: Oracle RAC DR test Hi, You can use clone.sh to clone GI and RDBMS homes to build a new cluster. After that either restore DB or switchover if toy take the path of building a standby database. Best Regards, Guenadi Jilevski On Thu, Dec 12, 2013 at 10:20 PM, Sanjay Mishra <smishra_97_at_yahoo.com> wrote: Thanks DHooge and Maaz Yes I agree that fresh Install is better option but the issue is that there are several patches been done on various homes and so it need to be documented every time and moreover company want to check if there are 18 such RAC environment need to be recreated on DR for any outage, then how long it will take and the process. Yes it is also true that we need to run few root based command and want to see if anyone has done such exercise. Thanks Sanjay On Thursday, December 12, 2013 3:05 PM, D'Hooge Freek <Freek.DHooge_at_uptime.be> wrote: Sanjay, With Oracle RAC, the name of the host is deeply embedded in the cluster registry. It is even so, that you can not change the hostname of a cluster node, you need to drop de node from the cluster, rename it and add it back again. So, I think your only option is to do a normal install of the GI on your DR servers. Of course, this is something you can prepare using silent install scripts if you only want to do the installation at the moment of a DR. regards, -- Freek D'Hooge Uptime Oracle Database Administrator email: freek.dhooge_at_uptime.be tel +32(03) 451 23 82 <tel:%2B32%2803%29%20451%2023%2082> http://www.uptime.be <http://www.uptime.be/> disclaimer: www.uptime.be/disclaimer.html On do, 2013-12-12 at 11:06 -0800, Sanjay Mishra wrote: Nassyam Create Dataguard from 4node to 2 node is not an issue. The main requirement is how to clone Oracle Grid infrastructure using the backup taken for software on Primary site. It is DR exercise where Database restore is not a challenge as long as Grid infrastructure is ready. So key challenges are to identify the various script to be executed after the Software from one of the node is restored on the DR exercise server and how to create the various configuration files including ASM based ocr/voting disk and other ASM configuration. Once this is done, Database cloning using Tape restore will not be an issue. This is one time exercise to check and document the procedure to rebuild the environment from offshore tape backup TIA Sanjay On Thursday, December 12, 2013 1:52 PM, Nassyam Basha <nassyambasha_at_gmail.com> wrote: Hi Sanjay, Are you looking for 4-node to 2-node DR setup? If so you can refer below links. I usually refer MAA documents. http://www.oracle.com/au/products/database/maa-wp-10g-racprimaryracphysicalsta-131940.pdf http://www.oracledba.org/11gR2/dr/11gR2_dataguard_RAC_to_RAC.html documentsay point to 2-node standby or 3-node, you may need to perform changes only few parameters like FAL_SERVER, LOG_ARCHIVE_CONFIG so on. You will get idea if you refer those links. Documents you may not get exactly as per your environment, you can refer them and of course you can modify steps as required. Hope this helps. But the below question is confusing still, can you describe more ? what are the steps for Grid Infrasturcture cloning? Thank you, Nassyam Basha Sent from iPhone On Dec 12, 2013, at 11:48 PM, Sanjay Mishra <smishra_97_at_yahoo.com> wrote: Hi Can anyone share the doc/reference for doing DR exercise for 4-node Primary RAC (11g R2) on 2-node DR RAC ? We have 4-Node Oracle 11g R2 RAC with 8 Databases using ASM based OCR/Voting and Databases on Linux environment. Now Company wants to perform a DR exercise where backup from Primary Tape will be used to create the DR environment using only 2nodes. So I appreciate if someone share experience in RAC cloning/Setup as what are the steps for Grid Infrasturcture cloning. TIA Sanjay -- http://www.freelists.org/webpage/oracle-l
Date: Thu, 12 Dec 2013 13:05:32 -0800 (PST)
Message-ID: <1386882332.36335.YahooMailNeo_at_web122101.mail.ne1.yahoo.com>
Has anyone tried the process for clone.sh and can share the experience. I am also working to create 11g R2 RAC on VBox to try the process before document the steps and so want to check if anyone has used and found/share his experience. Thanks Sanjay On Thursday, December 12, 2013 3:46 PM, "MacGregor, Ian A." <ian_at_slac.stanford.edu> wrote: Done. Please submit future requests as an RT ticket. Thank you Ian -----Original Message----- From: oracle-l-bounce_at_freelists.org [mailto:oracle-l-bounce_at_freelists.org] On Behalf Of Guenadi Jilevski Sent: Thursday, December 12, 2013 12:35 PM To: smishra_97_at_yahoo.com Cc: Freek.DHooge_at_uptime.be; nassyambasha_at_gmail.com; oracle-l@freelists.org Subject: Re: Oracle RAC DR test Hi, You can use clone.sh to clone GI and RDBMS homes to build a new cluster. After that either restore DB or switchover if toy take the path of building a standby database. Best Regards, Guenadi Jilevski On Thu, Dec 12, 2013 at 10:20 PM, Sanjay Mishra <smishra_97_at_yahoo.com> wrote: Thanks DHooge and Maaz Yes I agree that fresh Install is better option but the issue is that there are several patches been done on various homes and so it need to be documented every time and moreover company want to check if there are 18 such RAC environment need to be recreated on DR for any outage, then how long it will take and the process. Yes it is also true that we need to run few root based command and want to see if anyone has done such exercise. Thanks Sanjay On Thursday, December 12, 2013 3:05 PM, D'Hooge Freek <Freek.DHooge_at_uptime.be> wrote: Sanjay, With Oracle RAC, the name of the host is deeply embedded in the cluster registry. It is even so, that you can not change the hostname of a cluster node, you need to drop de node from the cluster, rename it and add it back again. So, I think your only option is to do a normal install of the GI on your DR servers. Of course, this is something you can prepare using silent install scripts if you only want to do the installation at the moment of a DR. regards, -- Freek D'Hooge Uptime Oracle Database Administrator email: freek.dhooge_at_uptime.be tel +32(03) 451 23 82 <tel:%2B32%2803%29%20451%2023%2082> http://www.uptime.be <http://www.uptime.be/> disclaimer: www.uptime.be/disclaimer.html On do, 2013-12-12 at 11:06 -0800, Sanjay Mishra wrote: Nassyam Create Dataguard from 4node to 2 node is not an issue. The main requirement is how to clone Oracle Grid infrastructure using the backup taken for software on Primary site. It is DR exercise where Database restore is not a challenge as long as Grid infrastructure is ready. So key challenges are to identify the various script to be executed after the Software from one of the node is restored on the DR exercise server and how to create the various configuration files including ASM based ocr/voting disk and other ASM configuration. Once this is done, Database cloning using Tape restore will not be an issue. This is one time exercise to check and document the procedure to rebuild the environment from offshore tape backup TIA Sanjay On Thursday, December 12, 2013 1:52 PM, Nassyam Basha <nassyambasha_at_gmail.com> wrote: Hi Sanjay, Are you looking for 4-node to 2-node DR setup? If so you can refer below links. I usually refer MAA documents. http://www.oracle.com/au/products/database/maa-wp-10g-racprimaryracphysicalsta-131940.pdf http://www.oracledba.org/11gR2/dr/11gR2_dataguard_RAC_to_RAC.html documentsay point to 2-node standby or 3-node, you may need to perform changes only few parameters like FAL_SERVER, LOG_ARCHIVE_CONFIG so on. You will get idea if you refer those links. Documents you may not get exactly as per your environment, you can refer them and of course you can modify steps as required. Hope this helps. But the below question is confusing still, can you describe more ? what are the steps for Grid Infrasturcture cloning? Thank you, Nassyam Basha Sent from iPhone On Dec 12, 2013, at 11:48 PM, Sanjay Mishra <smishra_97_at_yahoo.com> wrote: Hi Can anyone share the doc/reference for doing DR exercise for 4-node Primary RAC (11g R2) on 2-node DR RAC ? We have 4-Node Oracle 11g R2 RAC with 8 Databases using ASM based OCR/Voting and Databases on Linux environment. Now Company wants to perform a DR exercise where backup from Primary Tape will be used to create the DR environment using only 2nodes. So I appreciate if someone share experience in RAC cloning/Setup as what are the steps for Grid Infrasturcture cloning. TIA Sanjay -- http://www.freelists.org/webpage/oracle-l
-- http://www.freelists.org/webpage/oracle-lReceived on Thu Dec 12 2013 - 22:05:32 CET