Re: 11gr2 Clusterware config (or: does anyone know what an endpoint is?)

From: Andrew Kerber <andrew.kerber_at_gmail.com>
Date: Thu, 3 Feb 2011 12:27:32 -0600
Message-ID: <AANLkTin1Dopiz_Vtva_NQ3fC0tBpUwGNYVTy6fKSmvrt_at_mail.gmail.com>

I guess I didnt explain the problem. There are now 3 ips for SCAN, and they show up properly in DNS and in srvctl config scan, but according to Oracle I have to add another scan listener. I cant figure out the correct syntax of the command to add a scan listener, primarily because I dont know what a scan prefix or an endpoint is.

On Thu, Feb 3, 2011 at 11:35 AM, Surachart Opun <surachart_at_gmail.com> wrote:

> >srvctl config scan also showed just two
> How about nslookup and dig command-line show you?
> 2 IPs or 3 IPs
>
> >Oracle usually said dont use crsctl for this kind of stuff except as a
> last resort.
>
> if you need to add resource SCAN or SCAN LISTNER - you may need it
>
> If you want to use "srvctl" -> check DNS see 3 IPs(mayby reverse DNS too),
> remove SCAN + SCAN LISTENER and then ADD again by srvctl
>
>
> Good Luck
> Surachart Opun
> http://surachartopun.com
> Oracle ACE, OCE, OCP
>
>
> On Thu, Feb 3, 2011 at 11:41 PM, Andrew Kerber <andrew.kerber_at_gmail.com>wrote:
>
>> srvctl config scan also showed just two. And if your dns is configured
>> properly, it should show all 3 entries. At least it does on Solaris and on
>> oel. When does the third entry not show?
>>
>> does crsctl add the entry to the endpoints_listener.ora file?
>>
>> The last time I checked, Oracle usually said dont use crsctl for this kind
>> of stuff except as a last resort.
>>
>>
>> On Thu, Feb 3, 2011 at 10:30 AM, Surachart Opun <surachart_at_gmail.com>wrote:
>>
>>> To Andrew,
>>>
>>>
>>> > The nslookup showed only 2 ip addresses, not the required 3.
>>> nslookup -> that depends on your DNS server
>>>
>>> what do you see in?
>>> $ srvctl config scan
>>>
>>> Oracle suggests 3 IPs, so you can have 2 IPs for SCAN.
>>>
>>>
>>> >Has anyone used the srvctl add scan_listener command
>>> nope, I added IP SCAN and scan listener by using "crsctl"
>>>
>>> Example:
>>> # crsctl status res ora.LISTENER_SCAN1.lsnr -p
>>>
>>> and then check attribute for using with SCAN2 Listener
>>> and use
>>> > crsctl add resource
>>>
>>>
>>> http://download.oracle.com/docs/cd/E11882_01/rac.112/e16794/crsref.htm#CHDIHGHE
>>>
>>>
>>> Good Luck
>>> Surachart Opun
>>> http://surachartopun.com
>>> Oracle ACE, OCE, OCP
>>>
>>>
>>>
>>> On Thu, Feb 3, 2011 at 11:17 PM, Andrew Kerber <andrew.kerber_at_gmail.com>wrote:
>>>
>>>> So, I recently took ownership of an 11gR2 cluster. One of the first
>>>> things I noticed is that the SCAN was not set up correctly. The nslookup
>>>> showed only 2 ip addresses, not the required 3. I am not sure how they
>>>> managed to install it this way, but I am trying to fix it. I had the
>>>> network guys add the 3rd ip to the scan round robin, then ran (after
>>>> stopping scan and scan listener):
>>>>
>>>> srvctl modify scan -n <scan-name>
>>>>
>>>> Well, we had connection (connect failures on every third attempt)
>>>> problems and oracle said I had to add a scan listener, and gave me the
>>>> syntax for adding a scan listener (ie, they copied it out of the doc). (see
>>>> below). So, now I have given oracle the output of my srvctl config scan
>>>> command asked for an example of what the command should look like with my
>>>> given information. And no answer yet. So I suspect that oracle support
>>>> doesnt know exactly how to do this either. Has anyone used the srvctl add
>>>> scan_listener command, or know how to do it?
>>>>
>>>> srvctl add scan_listener [-l <lsnr_name_prefix>] [-s] [-p
>>>> [TCP:]<port>[/IPC:<key>][/NMP:<pipe_name>][/TCPS:<s_port>] [/SDP:<port>]]
>>>> -l <lsnr_prefix> SCAN listener name prefix
>>>> -s Skip the checking of ports
>>>> -p [TCP:]<port>[/IPC:<key>][/NMP:<pipe_name>][/TCPS:<s_port>]
>>>> [/SDP:<port>] SCAN Listener endpoints
>>>> -h Print usage
>>>>
>>>>
>>>> --
>>>> Andrew W. Kerber
>>>>
>>>> 'If at first you dont succeed, dont take up skydiving.'
>>>>
>>>
>>>
>>
>>
>> --
>> Andrew W. Kerber
>>
>> 'If at first you dont succeed, dont take up skydiving.'
>>
>
>

-- 
Andrew W. Kerber

'If at first you dont succeed, dont take up skydiving.'

--
http://www.freelists.org/webpage/oracle-l

Received on Thu Feb 03 2011 - 12:27:32 CST