Re: Clusterware 11.1.0.6 install

From: Stefan Knecht <knecht.stefan_at_gmail.com>
Date: Wed, 25 Feb 2009 21:07:52 +0100
Message-ID: <486b2b610902251207n25f9183ds6f7f1add4b8cb92e_at_mail.gmail.com>



su -

Stefan


Stefan P Knecht
CEO & Founder
s_at_10046.ch

10046 Consulting GmbH
Schwarzackerstrasse 29
CH-8304 Wallisellen
Switzerland

Phone +41-(0)8400-10046
Cell +41 (0) 79 571 36 27
info_at_10046.ch
http://www.10046.ch


On Wed, Feb 25, 2009 at 9:05 PM, Arm, Mike (IT) <michael.arm_at_ngc.com> wrote:

> Are you running root.sh as root? (su - or sudo su -).
>
> Mike
>
> ------------------------------
> *From:* oracle-l-bounce_at_freelists.org [mailto:
> oracle-l-bounce_at_freelists.org] *On Behalf Of *Stefan Knecht
> *Sent:* Wednesday, February 25, 2009 2:06 PM
> *To:* ORACLE-L
> *Subject:* Clusterware 11.1.0.6 install
>
> Hello all
>
> having some problems that I can't see the reason for ... I've gone through
> the installation of the clusterware with OUI. Then, when asked to run
> root.sh, following happens:
>
> ./root.sh
> WARNING: directory '/opt/app/oracle/product' is not owned by root
> Checking to see if Oracle CRS stack is already configured
>
> Setting the permissions on OCR backup directory
> Setting up Network socket directories
> PROT-1: Failed to initialize ocrconfig
> Failed to upgrade Oracle Cluster Registry configuration
>
> The "not owned by root" can be ignored. The problem is this, in
> log/`hostname`/client/ocrconfig_PID.log:
>
> Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996,
> 2007 Oracle. All rights reserved.
> 2009-02-25 19:57:03.484: [ default][2554967072]proa_lms_init:1: LMS init
> successful
> 2009-02-25 19:57:03.502: [ OCROSD][2554967072]utsz:4: Error in reading
> 2009-02-25 19:57:03.502: [ OCROSD][2554967072]utfill:11: Could not get
> geometry of rawdevice errno=5, errstring = Input/output error
> 2009-02-25 19:57:03.510: [ OCROSD][2554967072]utsz:4: Error in reading
> 2009-02-25 19:57:03.510: [ OCROSD][2554967072]utfill:11: Could not get
> geometry of rawdevice errno=5, errstring = Input/output error
> 2009-02-25 19:57:03.510: [ OCROSD][2554967072]utopen:10:None of the OCR
> devices are usable
> 2009-02-25 19:57:03.510: [ OCRRAW][2554967072]proprinit: Could not open
> raw device
> 2009-02-25 19:57:03.510: [ default][2554967072]a_init:7!: Backend init
> unsuccessful : [26]
> [ default][2554967072]a_get_last_error: Buf too small (80, 110)
> 2009-02-25 19:57:03.511: [ OCRCONF][2554967072]ocrconfig starts...
> 2009-02-25 19:57:03.511: [ OCRCONF][2554967072]Upgrading OCR data
> 2009-02-25 19:57:03.511: [ default][2554967072]proa_lms_init:1: LMS init
> successful
> 2009-02-25 19:57:03.528: [ OCROSD][2554967072]utsz:4: Error in reading
> 2009-02-25 19:57:03.528: [ OCROSD][2554967072]utfill:11: Could not get
> geometry of rawdevice errno=5, errstring = Input/output error
> 2009-02-25 19:57:03.537: [ OCROSD][2554967072]utsz:4: Error in reading
> 2009-02-25 19:57:03.537: [ OCROSD][2554967072]utfill:11: Could not get
> geometry of rawdevice errno=5, errstring = Input/output error
> 2009-02-25 19:57:03.537: [ OCROSD][2554967072]utopen:10:None of the OCR
> devices are usable
> 2009-02-25 19:57:03.537: [ OCRRAW][2554967072]proprinit: Could not open
> raw device
> 2009-02-25 19:57:03.537: [ default][2554967072]a_init:7!: Backend init
> unsuccessful : [26]
>
> This appears to be an issue with the OCR devices... However, they're
> readable and writable:
>
> --- 40 # dd if=/dev/emcpowerr of=/tmp/test bs=1024 count=1024
> 1024+0 records in
> 1024+0 records out
>
>
> --- 41 # dd if=/tmp/test of=/dev/emcpowerr bs=1024 count=1024
> 1024+0 records in
> 1024+0 records out
>
> For some reason, during the install of the software, when asked to enter
> the names for the OCR disks in OUI, the owner needed to be oracle:dba. So it
> was.
>
> Now, after root.sh exits, the owner is changed to root. I don't see any
> evidence of a chown inside the scripts called by root.sh -- so it must be
> the binary doing this (????)
>
> Checking on another, working install of 11g, the owner is oracle:dba (which
> makes sense).
>
> Any ideas on what else I could check ?
>
> Opening an SR as we speak, but perhaps someone else has fallen down this
> pit before :)
>
> Cheers
>
> Stefan
>
>
>
>
>
> =========================
>
> Stefan P Knecht
> CEO & Founder
> s_at_10046.ch
>
> 10046 Consulting GmbH
> Schwarzackerstrasse 29
> CH-8304 Wallisellen
> Switzerland
>
> Phone +41-(0)8400-10046
> Cell +41 (0) 79 571 36 27
> info_at_10046.ch
> http://www.10046.ch
>
> =========================
>

--
http://www.freelists.org/webpage/oracle-l
Received on Wed Feb 25 2009 - 14:07:52 CST

Original text of this message