Re: Oracle 10g RAC on AIX
Date: Tue, 29 Jan 2008 07:47:23 -0800 (PST)
Message-ID: <51290.53919.qm@web51305.mail.re2.yahoo.com>
Tomi
Thanks and I will also look into it.
Sanjay
- Original Message ---- From: Tomi Wijanto <restomi_w_at_yahoo.com> To: smishra_97_at_yahoo.com Cc: oracle-l_at_freelists.org Sent: Tuesday, January 29, 2008 10:40:57 AM Subject: Re: Oracle 10g RAC on AIX
Hi Sanjay,
there is known issue related to patch 6440669, you cannot start the GSD after applying it.
You should apply patch 6596361 (MLR#12) after 6440669.
Regards,
tomi
- Sanjay Mishra <smishra_97_at_yahoo.com> wrote:
> Jeremy
>
> This is dev environment. I had patched the CRS/RDBMS
> to 10203 and then applied 6440669 merge Patch. I had
> now even rebooted all nodes and now all daemon are
> back. ocrcheck is also showing everything is fine
> but now crs_stat -t is hanging on all of them. When
> it was rebooted, it came fine bit after 15-20
> minutes, when I tried again, it is hanging
>
> While applying the 6440669 patch, it has the last
> part on AIx it has special instrction
> To try and identify the likely cause please execute
> the following commands
> # and provide the output to your support
> representative, who will be able to
> # identify the corrective steps.
> # genld -l | grep <CRS_HOME>
> # genkld | grep <CRS_HOME> ( full or partial
> path will do )
>
> I had few rows coming in the output. I had even ran
> the /usr/sbin/slibclean again and ran the above
> gen... command bit still see it like
> $genkld | grep "/u01/app/crs/10.2"
> 900000003d75100 103e0
> /u01/app/crs/10.2/lib/libdbcfg10.a[shr_dbcfg10.o]
> 900000002691100 162fbbd
> /u01/app/crs/10.2/lib/libttsh10.a[shr_ttsh10.o]
> 900000003d2c100 40de1
> /u01/app/crs/10.2/lib/libocrb10.a[shr_ocrb10.o]
> 900000003d28100 162d
> /u01/app/crs/10.2/lib/libskgxn2.a[shr_skgxn2.o]
> 900000003d1d100 a1cc
> /u01/app/crs/10.2/lib/libocrutl10.a[shr_ocrutl10.o]
> 900000003cc1100 5b130
> /u01/app/crs/10.2/lib/libocr10.a[shr_ocr10.o]
> 9000000025eb100 a5459
> /u01/app/crs/10.2/lib/libhasgen10.a[shr_hasgen10.o]
> $genld -l | grep "/u01/app/crs/10.2"
> 900000003d28100 162d
> /u01/app/crs/10.2/lib/libskgxn2.a[shr_skgxn2.o]
> 900000003d2c100 40de1
> /u01/app/crs/10.2/lib/libocrb10.a[shr_ocrb10.o]
> 900000003d1d100 a1cc
> /u01/app/crs/10.2/lib/libocrutl10.a[shr_ocrutl10.o]
> 900000002691100 162fbbd
> /u01/app/crs/10.2/lib/libttsh10.a[shr_ttsh10.o]
> 9000000025eb100 a5459
> /u01/app/crs/10.2/lib/libhasgen10.a[shr_hasgen10.o]
> 900000003cc1100 5b130
> /u01/app/crs/10.2/lib/libocr10.a[shr_ocr10.o]
> 900000003d2c100 40de1
> /u01/app/crs/10.2/lib/libocrb10.a[shr_ocrb10.o]
> 900000003d28100 162d
> /u01/app/crs/10.2/lib/libskgxn2.a[shr_skgxn2.o]
> 900000003d1d100 a1cc
> /u01/app/crs/10.2/lib/libocrutl10.a[shr_ocrutl10.o]
> 900000003cc1100 5b130
> /u01/app/crs/10.2/lib/libocr10.a[shr_ocr10.o]
> 900000002691100 162fbbd
> /u01/app/crs/10.2/lib/libttsh10.a[shr_ttsh10.o]
> 9000000025eb100 a5459
> /u01/app/crs/10.2/lib/libhasgen10.a[shr_hasgen10.o]
> 900000003d1d100 a1cc
> /u01/app/crs/10.2/lib/libocrutl10.a[shr_ocrutl10.o]
> 900000003d2c100 40de1
> /u01/app/crs/10.2/lib/libocrb10.a[shr_ocrb10.o]
> 900000003cc1100 5b130
> /u01/app/crs/10.2/lib/libocr10.a[shr_ocr10.o]
> 900000003d28100 162d
> /u01/app/crs/10.2/lib/libskgxn2.a[shr_skgxn2.o]
> 900000002691100 162fbbd
> /u01/app/crs/10.2/lib/libttsh10.a[shr_ttsh10.o]
> 9000000025eb100 a5459
> /u01/app/crs/10.2/lib/libhasgen10.a[shr_hasgen10.o]
> 900000003d1d100 a1cc
> /u01/app/crs/10.2/lib/libocrutl10.a[shr_ocrutl10.o]
> 900000003d2c100 40de1
> /u01/app/crs/10.2/lib/libocrb10.a[shr_ocrb10.o]
> 900000003d28100 162d
> /u01/app/crs/10.2/lib/libskgxn2.a[shr_skgxn2.o]
> 900000003cc1100 5b130
> /u01/app/crs/10.2/lib/libocr10.a[shr_ocr10.o]
> 900000002691100 162fbbd
> /u01/app/crs/10.2/lib/libttsh10.a[shr_ttsh10.o]
> 9000000025eb100 a5459
> /u01/app/crs/10.2/lib/libhasgen10.a[shr_hasgen10.o]
>
> I don't know about this and so as per patch
> instruction , open the issue to Oracle support.
>
> There is no error during the patch application on
> any node.
>
> ----- Original Message ----
> From: Jeremy Schneider
> <jeremy.schneider_at_ardentperf.com>
> To: smishra_97_at_yahoo.com
> Cc: oracle-l_at_freelists.org
> Sent: Monday, January 28, 2008 4:36:09 PM
> Subject: Re: Oracle 10g RAC on AIX
>
> Is this a production system? If it's not
> production, then I'm curious - does the system
> consistently come up in this state when you reboot
> everything? Also, I couldn't tell from your email -
> did you run those commands (ps, crsctl, init.d stop)
> on node 1 or on the other nodes?
>
>
>
> On 1/28/08, Sanjay Mishra <smishra_97_at_yahoo.com>
> wrote:
> Hi
>
> I am working on 10g RAC on AIX and having the
> strange problem. I applied Patchset 2 and now
> getting some problem in access crs
>
> On Node 1, it shows in crs_stat -t that all
> Resources gsd/ons/vip are up on all 5 modes while on
> all other nodes, it shows the process are running
> but crs_stat -t gives the following error
> CRS-0184: Cannot communicate with the CRS daemon.
>
>
> ps -ef|grep crs gives the output as
> root 565460 716832 0 14:12:33 - 0:22
> /u01/app/crs/10.2/bin/crsd.bin reboot
> root 589936 1 0 14:12:46 - 0:00
> /u01/app/crs/10.2/bin/racgmain ora.gkd122.vip
> rundetach ora.gkd122.vip 1 startorp gkd122
> oracle 614456 860378 0 14:12:41 - 0:00
> /u01/app/crs/10.2/bin/evmlogger.bin -o
> /u01/app/crs/10.2/evm/log/evmlogger.info -l
> /u01/app/crs/10.2/evm/log/evmlogger.log
> oracle 635124 426140 0 14:12:36 - 0:05
> /u01/app/crs/10.2/bin/ocssd.bin
> oracle 675854 1 0 14:12:47 - 0:00
> /u01/app/crs/10.2/opmn/bin/ons -d
> root 716832 1 0 14:12:31 - 0:00
> /bin/sh /etc/init.crsd run
> oracle 733338 684146 0 14:12:34 - 0:00
> /bin/sh -c cd
> /u01/app/crs/10.2/log/gkd122/cssd/oclsomon; ulimit
> -c unlimited; /u01/app/crs/10.2/bin/oclsomon ||
> exit $?
> oracle 737488 675854 0 14:12:47 - 0:00
> /u01/app/crs/10.2/opmn/bin/ons -d
> root 843828 667806 0 14:12:34 - 0:00
> /u01/app/crs/10.2/bin/oprocd.bin run -t 1000 -m 500
> -f
> oracle 860378 761930 0 14:12:33 - 0:00
> /u01/app/crs/10.2/bin/evmd.bin
> oracle 864454 733338 0 14:12:34 - 0:01
> /u01/app/crs/10.2/bin/oclsomon.bin
>
>
> I tried to stop crsctl check crs
> $crsctl check crs
> CSS appears healthy
> Try againEVM appears healthy
>
> I tried to stop crs using crsctl stop crs or
> /etc/init.crs stop as root but the processes are
> still running.
>
> Any advice to look into it
>
> Sanjay
>
>
>
> Be a better friend, newshound, and know-it-all with
> Yahoo! Mobile. Try it now.
>
>
>
> --
> Jeremy Schneider
> Chicago, IL
> http://www.ardentperf.com/category/technical
>
>
>
>
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo.com/r/hs
Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs
Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs
-- http://www.freelists.org/webpage/oracle-lReceived on Tue Jan 29 2008 - 09:47:23 CST