Oracle FAQ Your Portal to the Oracle Knowledge Grid
HOME | ASK QUESTION | ADD INFO | SEARCH | E-MAIL US
 

Home -> Community -> Mailing Lists -> Oracle-L -> Re: 10g RAC with Veritas SF

Re: 10g RAC with Veritas SF

From: LS Cheng <exriscer_at_gmail.com>
Date: Mon, 27 Nov 2006 20:45:39 +0100
Message-ID: <6e9345580611271145s3c4e08a6se9ad2a651f62d946@mail.gmail.com>


Hi

I am not really guy who decided this configuration, they simply hired me to do the installation.

They have same setup in a fail over site located in 200KM though

On 11/27/06, Hameed, Amir <Amir.Hameed_at_xerox.com> wrote:
>
> May I ask why you are using all the partitions from the same server for
> RAC? What if the server goes down for some reason; it will take all your RAC
> nodes down with it.
>
> ------------------------------
> *From:* oracle-l-bounce_at_freelists.org [mailto:
> oracle-l-bounce_at_freelists.org] *On Behalf Of *LS Cheng
> *Sent:* Monday, November 27, 2006 2:13 PM
> *To:* oracle-l_at_freelists.org
> *Subject:* Re: 10g RAC with Veritas SF
>
> Hi all
>
> I carried out first of four 10g RAC R2 with Veritas SFRAC installation
> today.
>
> There were some network configuration problems which still need to be
> issued, I am not sure if this normal configuration under Solaris 10?
>
> The server is a Primepower 2500 with 8 partitions where 4 RAC will be
> configured.
>
> The 8 partitions had these names
>
> server1
> server2
> ...
> server8
>
> there is an internal network between these partitions with these IPs
>
> 192.168.0.1
> 192.168.0.2
> ...
> 192.168.0.8
>
> And public IP with corrsponding entries in /etc/hosts
>
> 10.1.100.1 server1_pub
> 10.1.100.2 server2_pub
> ...
> 10.1.100.8 server8_pub
>
> I was not aware that when you ping server1 it goes to the internal IP,
> 192.168.0.1, during CRS installation, in the screen where you choose
> Public IP, Private IP And Virtual IP OUI chose server1 hostname for the
> public IP interface which was wrong, it has to use server1_pub AFAIK
>
> I wonder, does RAC need primary histname for CRS? An alias would not work?
>
> The installation guide states that CRS need primary hostname when NOT used
> with Third Party Clusterware but since there is Veritas in the middle I am
> not sure if this network configuration is "NORMAL" or something out of
> order?
>
>
> Thanks
>
> --
> LSC
>
>
>
>
>
>
>
> On 11/22/06, LS Cheng <exriscer_at_gmail.com> wrote:
> >
> > I have to do 4 RAC installations with your setup (Veritas SFRAC 4.1 &
> > Sun Solaris 10) next 4 weeks in Fujitsu Primerpower 2500. Will let you know
> > the experience!
> >
> > Regards
> >
> > --
> > LSC
> >
> >
> > On 11/17/06, amonte <ax.mount_at_gmail.com> wrote:
> > >
> > > Hi
> > >
> > > I have to perform a Oracle 10.2.0.2 RAC Installation on Sun Solaris
> > > 10, Veritas Storage Foundation for RAC v5.0 will be used and will be
> > > installed by some Veritas guy.
> > >
> > > I havent got previous experience with Veritas SF + RAC combination, in
> > > 10g I have used only Oracle Clusterware. I wonder how different will this
> > > be? What should I tell the Veritas guy about the cluster
> > > configurations I need? At Metalink there is no document about 10g, there is
> > > one when 9i was released which I am reading it right now.
> > >
> > > TiA!
> > >
> > > Alex
> > >
> > >
> > >
> >
>

--
http://www.freelists.org/webpage/oracle-l
Received on Mon Nov 27 2006 - 13:45:39 CST

Original text of this message

HOME | ASK QUESTION | ADD INFO | SEARCH | E-MAIL US