Home » RDBMS Server » Networking and Gateways » Oracle Connectivity between two country
Oracle Connectivity between two country [message #204144] Sat, 18 November 2006 03:27 Go to next message
kamran.it
Messages: 265
Registered: September 2005
Location: Karachi
Senior Member
Hi

I would like to ask that I want to connect oracle between two country. Actual Our Director visited outside country and I am running a server base software in oracle 8.0.5 amd oracle 6i Server Operating system is windows server 2003.

I have DSL account.

Please help in this regard.


Re: Oracle Connectivity between two country [message #205208 is a reply to message #204144] Thu, 23 November 2006 21:37 Go to previous messageGo to next message
nmacdannald
Messages: 460
Registered: July 2005
Location: Stockton, California - US...
Senior Member
I think you are asking about net8 ip configriation.

your control file should look like this:
# TNSNAMES.ORA Network Configuration File:\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.

OS2T =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = your host.whatevere)(PORT = 1522))
)
(CONNECT_DATA =
(SERVICE_NAME = oracle)
)
)

OS2P =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = host.yourhost)(PORT = 1522))
)
(CONNECT_DATA =
(SERVICE_NAME = oracle)
)
)
Re: Oracle Connectivity between two country [message #205209 is a reply to message #204144] Thu, 23 November 2006 21:40 Go to previous message
nmacdannald
Messages: 460
Registered: July 2005
Location: Stockton, California - US...
Senior Member
also
# copyright (c) 1997 by the Oracle Corporation
#
# NAME
# listener.ora
# FUNCTION
# Network Listener startup parameter file example
# NOTES
# This file contains all the parameters for listener.ora,
# and could be used to configure the listener by uncommenting
# and changing values. Multiple listeners can be configured
# in one listener.ora, so listener.ora parameters take the form
# of SID_LIST_<lsnr>, where <lsnr> is the name of the listener
# this parameter refers to. All parameters and values are
# case-insensitive.

# <lsnr>
# This parameter specifies both the name of the listener, and
# it listening address(es). Other parameters for this listener
# us this name in place of <lsnr>. When not specified,
# the name for <lsnr> defaults to "LISTENER", with the default
# address value as shown below.
#
# LISTENER =
# (ADDRESS_LIST=
# (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
# (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))

# SID_LIST_<lsnr>
# List of services the listener knows about and can connect
# clients to. There is no default. See the Net8 Administrator's
# Guide for more information.
#
# SID_LIST_LISTENER=
# (SID_LIST=
# (SID_DESC=
# #BEQUEATH CONFIG
# (GLOBAL_DBNAME=salesdb.mycompany)
# (SID_NAME=sid1)
# (ORACLE_HOME=/private/app/oracle/product/8.0.3)
# #PRESPAWN CONFIG
# (PRESPAWN_MAX=20)
# (PRESPAWN_LIST=
# (PRESPAWN_DESC=(PROTOCOL=tcp)(POOL_SIZE=2)(TIMEOUT=1))
# )
# )
# )

# PASSWORDS_<lsnr>
# Specifies a password to authenticate stopping the listener.
# Both encrypted and plain-text values can be set. Encrypted passwords
# can be set and stored using lsnrctl.
# LSNRCTL> change_password
# Will prompt for old and new passwords, and use encryption both
# to match the old password and to set the new one.
# LSNRCTL> set password
# Will prompt for the new password, for authentication with
# the listener. The password must be set before running the next
# command.
# LSNRCTL> save_config
# Will save the changed password to listener.ora. These last two
# steps are not necessary if SAVE_CONFIG_ON_STOP_<lsnr> is ON.
# See below.
#
# Default: NONE
#
# PASSWORDS_LISTENER = 20A22647832FB454 # "foobar"

# SAVE_CONFIG_ON_STOP_<lsnr>
# Tells the listener to save configuration changes to listener.ora when
# it shuts down. Changed parameter values will be written to the file,
# while preserving formatting and comments.
# Default: OFF
# Values: ON/OFF
#
# SAVE_CONFIG_ON_STOP_LISTENER = ON

# USE_PLUG_AND_PLAY_<lsnr>
# Tells the listener to contact an Onames server and register itself
# and its services with Onames.
# Values: ON/OFF
# Default: OFF
#
# USE_PLUG_AND_PLAY_LISTENER = ON

# LOG_FILE_<lsnr>
# Sets the name of the listener's log file. The .log extension
# is added automatically.
# Default=<lsnr>
#
# LOG_FILE_LISTENER = lsnr

# LOG_DIRECTORY_<lsnr>
# Sets the directory for the listener's log file.
# Default: <oracle_home>/network/log
#
# LOG_DIRECTORY_LISTENER = /private/app/oracle/product/8.0.3/network/log

# TRACE_LEVEL_<lsnr>
# Specifies desired tracing level.
# Default: OFF
# Values: OFF/USER/ADMIN/SUPPORT/0-16
#
# TRACE_LEVEL_LISTENER = SUPPORT

# TRACE_FILE_<lsnr>
# Sets the name of the listener's trace file. The .trc extension
# is added automatically.
# Default: <lsnr>
#
# TRACE_FILE_LISTENER = lsnr

# TRACE_DIRECTORY_<lsnr>
# Sets the directory for the listener's trace file.
# Default: <oracle_home>/network/trace
#
# TRACE_DIRECTORY_LISTENER=/private/app/oracle/product/8.0.3/network/trace
# CONNECT_TIMEOUT_<lsnr>
# Sets the number of seconds that the listener waits to get a
# valid database query after it has been started.
# Default: 10
#
# CONNECT_TIMEOUT_LISTENER=10
and :
##############################################################################
# Copyright (c) 1991, 2005, Oracle. All rights reserved.
##############################################################################

###########################################
# Cursors and Library Cache
###########################################
open_cursors=300

###########################################
# Database Identification
###########################################
db_name=XE

###########################################
# Diagnostics and Statistics
###########################################
background_dump_dest=C:\oraclexe\app\oracle\admin\XE\bdump
core_dump_dest=C:\oraclexe\app\oracle\admin\XE\cdump
user_dump_dest=C:\oraclexe\app\oracle\admin\XE\udump

###########################################
# File Configuration
###########################################
control_files=("C:\oraclexe\oradata\XE\control.dbf")

###########################################
# Job Queues
###########################################
job_queue_processes=4

###########################################
# Miscellaneous
###########################################
compatible=10.2.0.1.0

###########################################
# Processes and Sessions
###########################################
sessions=20

###########################################
# SGA Memory
###########################################
sga_target=570M

###########################################
# Security and Auditing
###########################################
audit_file_dest=C:\oraclexe\app\oracle\admin\XE\adump
remote_login_passwordfile=EXCLUSIVE

###########################################
# Shared Server
###########################################
dispatchers="(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers=4

###########################################
# Sort, Hash Joins, Bitmap Indexes
###########################################
pga_aggregate_target=190M

###########################################
# System Managed Undo and Rollback Segments
###########################################
undo_management=AUTO
undo_tablespace=UNDO

###########################################
# Backup and Recovery
###########################################
DB_RECOVERY_FILE_DEST_SIZE = 10G
DB_RECOVERY_FILE_DEST = C:\oraclexe\app\oracle\flash_recovery_area

os_authent_prefix=""

local_listener="(ADDRESS=(PROTOCOL=TCP)(HOST=neilsquickie)(PORT=1522))"


Previous Topic: oracle.exe opens permanently the control_files an causes heavy processor use
Next Topic: TNS probs: Unable to connect the Data base
Goto Forum:
  


Current Time: Mon Dec 05 18:53:05 CST 2016

Total time taken to generate the page: 0.05460 seconds