Home » Developer & Programmer » Reports & Discoverer » Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within B_49
Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within B_49 [message #117937] Sun, 01 May 2005 21:45 Go to next message
doraistud
Messages: 14
Registered: April 2005
Junior Member
HI All,
I am facing error message: rep-1814 report cannot be formatted onject "vertically" can nver fir within the _49 Error in a specific Computer alone when i run a report. When i run the report in any other PC its working fine. Help me out what can be possible reason. I am yet to reinstall the Developer 2000 S/W.
Regards
Dorai
Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #170415 is a reply to message #117937] Wed, 03 May 2006 12:23 Go to previous messageGo to next message
atagore
Messages: 29
Registered: March 2006
Junior Member

ORACLE On-Line Help

URL= http://www.oracle.com/webapps/online-help/reports/10.1.2/state?navSetId=_&navId=3&vtTopicFile=htmlhelp_rwbuild_hs/rwmsgs/1814 .htm&vtTopicId=

REP-1814: Report cannot be formatted. Object '<object name>' can never fit within '<location>'.Cause:
The referenced object is causing the most recently formatted page to start with exactly the same state as the page previous . Formatting will therefore cycle until abnormally terminated. Possible causes of this error include:


Case 1: An object whose Print Condition type is All overflows to the next page;


Case 2: An object whose sizing is Variable or Expand does not appear to extend beyond page boundaries in the Paper Layout editor but does when the report is formatted;


Case 3: A repeating frame does not appear to extend beyond page boundaries in the Paper Layout editor but does when the report is formatted.

Action:

Using the referenced object as a guide, examine your report layout for objects that may extend beyond page boundaries. Note: The object referenced in the message is the object that extends beyond the boundary. This object may be pushed beyond the boundary by another object, and this second object may need modification.

icon8.gif  Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #183140 is a reply to message #170415] Wed, 19 July 2006 10:00 Go to previous messageGo to next message
oraclehari
Messages: 4
Registered: March 2006
Location: mumbai
Junior Member

Hi all,
Actually my case is different. When i try to run my report in SRS window with American English it is working fine. But when i changed to Germany as laguage settings it is not working. What to do with that.


[EDITED by LF: removed unnecessary quote of the whole previous message]

[Updated on: Tue, 16 June 2009 00:02] by Moderator

Report message to a moderator

Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #404442 is a reply to message #183140] Thu, 21 May 2009 19:24 Go to previous messageGo to next message
nastyjillu
Messages: 211
Registered: February 2009
Senior Member
iam getting same error.

i have 2 fields. fieldA
fieldB

fieldA is 2000 characters string. hence its occupying full first page, and fieldB is not able to print. hence iam getting that error.

when i run the report from a form iam getting error: TERMINATED_WITH_ERROR.

also

REP-1814: Report cannot be formatted. Object 'vertically' can never fit within 'F_CF_DESC'.

i know why iam getting error. but dont know how to fix it.

how to make fieldB print on next page when the first page is occupied by fieldA ??

thanks jillu

Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #404522 is a reply to message #404442] Fri, 22 May 2009 01:43 Go to previous messageGo to next message
Littlefoot
Messages: 20901
Registered: June 2005
Location: Croatia, Europe
Senior Member
Account Moderator
What are vertical elasticity properties of those fields and their frames set to? "Variable" (or "Expand") might help.

[Updated on: Fri, 22 May 2009 01:44]

Report message to a moderator

Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #404664 is a reply to message #404522] Fri, 22 May 2009 12:50 Go to previous messageGo to next message
nastyjillu
Messages: 211
Registered: February 2009
Senior Member
vertical elasticity for fieldA is expand
vertical elasticity for fieldB is expand

vertical elasticity for frame of fieldA is variable. even though i change it to expand its not working.

vertical elasticity for frame of fieldB is variable. even though i change it to expand its not working.

thanks
jillu
Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #408348 is a reply to message #404664] Mon, 15 June 2009 19:34 Go to previous messageGo to next message
nastyjillu
Messages: 211
Registered: February 2009
Senior Member
did anyone get solution for this issue?
Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #523947 is a reply to message #117937] Wed, 21 September 2011 04:23 Go to previous messageGo to next message
hilmy2010
Messages: 2
Registered: May 2007
Junior Member
set the repetitive frame property (print object on ) to first page instead of all pages
Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #550093 is a reply to message #523947] Thu, 05 April 2012 22:04 Go to previous messageGo to next message
nastyjillu
Messages: 211
Registered: February 2009
Senior Member
Hi,
After long time i came back to the same post. I got the same issue again but in a different way.
Issue: rep-1814 report cannot be formatted. object "vertically" can never fit within F_abc.

my report is working fine when i run from Report builder. But i am getting the above error when i run the report in the batch process. We submit the batch process through oracle forms.

It makes no sense to me as to how the report runs fine in report builder and how the field or layout is messed up when i run as batch process? how the layout is changed in the batch process? This is the strange issue i got.

Can anyone help me?
Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #550105 is a reply to message #550093] Fri, 06 April 2012 00:04 Go to previous messageGo to next message
Littlefoot
Messages: 20901
Registered: June 2005
Location: Croatia, Europe
Senior Member
Account Moderator
Did you run it with different parameters, perhaps? The ones which select different data and cause such an error?
Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #550175 is a reply to message #550105] Fri, 06 April 2012 08:30 Go to previous messageGo to next message
nastyjillu
Messages: 211
Registered: February 2009
Senior Member
I have selected the same parameters. I thought this might be the problem, but not.

Thanks
Jillu
Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #550187 is a reply to message #550175] Fri, 06 April 2012 13:17 Go to previous messageGo to next message
nastyjillu
Messages: 211
Registered: February 2009
Senior Member
Issue is resolved. We had to reboot the report server. Don't know how does it effect but it solved.

Thanks
Jillu
Re: Urgent : REP-1814 report cannot be formatted object "vertically" can never fit within [message #550214 is a reply to message #550187] Sat, 07 April 2012 01:32 Go to previous message
Littlefoot
Messages: 20901
Registered: June 2005
Location: Croatia, Europe
Senior Member
Account Moderator
Right; the simplest solutions are sometimes the most efficient.
Previous Topic: generate PDF 11g
Next Topic: Changing lov font face
Goto Forum:
  


Current Time: Sun Dec 11 04:07:19 CST 2016

Total time taken to generate the page: 0.06403 seconds