| Oracle 10g RAC on RHEL 5 - OCR integrity results are inconsistent [message #439494] |
Sun, 17 January 2010 16:06  |
kumarsz
Messages: 180
Registered: March 2005
Location: canada
|
Senior Member |
|
|
Hi,
I am installing RAC using vmware server with Windows7 as Host Operating Sytem and Linux RHEL 5 as Guest Operating Systems
All the clusterware installation went well till vipca after which I got following error at the last step of clusterware installation and I am stuckup now
OCR integrity results are inconsistent amongst the nodes.
OCR integrity found invalid for nodes: rac1
OCR integrity found valid for nodes: rac2
to my surprise, precheck using 'runcluvfy' did not produce errors
also i can see the shared disks from both the nodes
(which i created using 'datastore')
Following is my vmx file with disk configuration details
.encoding = "windows-1252"
config.version = "8"
virtualHW.version = "7"
floppy0.present = "FALSE"
mks.enable3d = "TRUE"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
nvram = "rac1.nvram"
virtualHW.productCompatibility = "hosted"
ft.secondary0.enabled = "TRUE"
tools.upgrade.policy = "useGlobal"
powerType.powerOff = "soft"
powerType.powerOn = "hard"
powerType.suspend = "hard"
powerType.reset = "soft"
displayName = "rac1"
extendedConfigFile = "rac1.vmxf"
scsi0.present = "TRUE"
scsi0.sharedBus = "none"
scsi0.virtualDev = "lsilogic"
memsize = "1024"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "rac1.vmdk"
scsi0:0.writeThrough = "TRUE"
scsi0:0.mode = "independent-persistent"
ide1:0.present = "TRUE"
ide1:0.fileName = "D:"
ide1:0.deviceType = "cdrom-raw"
ide1:0.allowGuestConnectionControl = "FALSE"
ethernet0.present = "TRUE"
ethernet0.allowGuestConnectionControl = "FALSE"
ethernet0.features = "1"
ethernet0.wakeOnPcktRcv = "FALSE"
ethernet0.networkName = "Bridged"
ethernet0.addressType = "generated"
ethernet1.present = "TRUE"
ethernet1.allowGuestConnectionControl = "FALSE"
ethernet1.features = "1"
ethernet1.wakeOnPcktRcv = "FALSE"
ethernet1.networkName = "Bridged"
ethernet1.addressType = "generated"
usb.present = "TRUE"
ehci.present = "TRUE"
guestOS = "rhel5"
uuid.location = "56 4d 06 fe e1 3a 74 f2-95 cb 5e ce 21 f5 5f f5"
uuid.bios = "56 4d 06 fe e1 3a 74 f2-95 cb 5e ce 21 f5 5f f5"
vc.uuid = "52 53 5a 15 47 db 9e ab-d7 a0 ee 15 b6 ae f1 28"
ide1:0.startConnected = "FALSE"
ide1:0.clientDevice = "FALSE"
ethernet0.generatedAddress = "00:0c:29:f5:5f:f5"
ethernet1.generatedAddress = "00:0c:29:f5:5f:ff"
tools.syncTime = "FALSE"
scsi0:0.redo = ""
vmotion.checkpointFBSize = "134217728"
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "16"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "33"
ethernet1.pciSlotNumber = "34"
ehci.pciSlotNumber = "35"
vmci0.pciSlotNumber = "36"
ethernet0.generatedAddressOffset = "0"
ethernet1.generatedAddressOffset = "10"
vmci0.id = "569729014"
disk.locking = "FALSE"
diskLib.dataCacheMaxSize = "0"
diskLib.dataCacheMaxReadAheadSize = "0"
diskLib.dataCacheMinReadAheadSize = "0"
diskLib.dataCachePageSize = "4096"
diskLib.maxUnsyncedWrites = "0"
scsi1.present = "TRUE"
scsi1.sharedBus = "none"
scsi1.virtualDev = "lsilogic"
scsi1:1.present = "TRUE"
scsi1:1.fileName = "\\PRATAP-PC\vm\ocr.vmdk"
scsi1:1.writeThrough = "TRUE"
scsi1:1.mode = "independent-persistent"
scsi1:1.deviceType = "disk"
scsi1:1.redo = ""
scsi1:2.present = "TRUE"
scsi1:2.fileName = "\\PRATAP-PC\vm\votingdisk.vmdk"
scsi1:2.writeThrough = "TRUE"
scsi1:2.mode = "independent-persistent"
scsi1:2.deviceType = "disk"
scsi1:2.redo = ""
scsi1:3.present = "TRUE"
scsi1:3.fileName = "\\PRATAP-PC\vm\asm1.vmdk"
scsi1:3.writeThrough = "TRUE"
scsi1:3.mode = "independent-persistent"
scsi1:3.deviceType = "disk"
scsi1:3.redo = ""
scsi1:4.present = "TRUE"
scsi1:4.fileName = "\\PRATAP-PC\vm\asm2.vmdk"
scsi1:4.writeThrough = "TRUE"
scsi1:4.mode = "independent-persistent"
scsi1:4.deviceType = "disk"
scsi1:4.redo = ""
scsi1:5.present = "TRUE"
scsi1:5.fileName = "\\PRATAP-PC\vm\asm3.vmdk"
scsi1:5.writeThrough = "TRUE"
scsi1:5.mode = "independent-persistent"
scsi1:5.deviceType = "disk"
scsi1:5.redo = ""
scsi1.pciSlotNumber = "37"
The vmx file for rac2 differs only in
1)displayname
2)ethernet0.generatedAddress
ethernet1.generatedAddress
3)uuid.location
uuid.bios
4)vmci0.id
Is there any workaround for this error?
Thanks and Regards,
Pratap
|
|
|
|
|
|
| Re: Oracle 10g RAC on RHEL 5 - OCR integrity results are inconsistent [message #439557 is a reply to message #439494] |
Mon, 18 January 2010 06:15  |
kumarsz
Messages: 180
Registered: March 2005
Location: canada
|
Senior Member |
|
|
Hi,
after googling I found 2 notes on this toic which say ocr needs to be owned by root
In my case I have configured following ownership and permissions
chown oracle:oinstall /dev/raw/raw1
chown oracle:oinstall /dev/raw/raw2
chown oracle:oinstall /dev/raw/raw3
chown oracle:oinstall /dev/raw/raw4
chown oracle:oinstall /dev/raw/raw5
chmod 640 /dev/raw/raw1
chmod 640 /dev/raw/raw2
chmod 640 /dev/raw/raw3
chmod 640 /dev/raw/raw4
chmod 640 /dev/raw/raw5
Also since I did not have /etc/sysconfig/rawdevices file I have created /etc/udev/rules.d/63-oracle-raw.rules as described in
http://arjudba.blogspot.com/2008/08/on-rhl5-rawdevices-unrecognized-service.html
Will it be causing the issue?
If yes, how come the error was produced only for node2?
Please let me know any workaround I am stuckup
Also please help me knowing where can I start with again, since I have left clusterware installation running and completed vipca and script execution by root. Do I need to cleanup before I start re-execution or I can run it again as it is?
Thanks and Regards,
Pratap
|
|
|
|
|
|
| Re: Oracle 10g RAC on RHEL 5 - OCR integrity results are inconsistent [message #439732 is a reply to message #439494] |
Tue, 19 January 2010 05:05 |
kumarsz
Messages: 180
Registered: March 2005
Location: canada
|
Senior Member |
|
|
Hi gentlebabu,
Thanks for your reply
Unfortunately I have already started the setup again from scratch
However this time (since I am using RHEL5) I will mention /dev/sdb1 for ocr and /dev/sdc1 for voting disk etc. rather tha /dev/raw/raw1 and /dev/raw/raw2
Thanks for letting me know about the setting
Scsi1.sharedBus = "VIRTUAL"
I will keep this in mind during current installation
Thanks and Regards,
Pratap
|
|
|
|
] 
Blog
Search
Help
Members
Register
Login
Home
