Home » Server Options » Data Guard » Can I Configure Dataguard using Network Address translation ? (oracle 10.2.0.3.0 AIX)
Can I Configure Dataguard using Network Address translation ? [message #411343] Fri, 03 July 2009 02:50 Go to next message
dba4bank
Messages: 49
Registered: October 2007
Location: TURKEY
Member
Hi,

Can i configure oracle dataguard between 2 server primary and standby with both having same physical ip address?

We are going to use same physical address for both server (pri&sec), we will perform a Network Address translation (NAT) between the 2 machine , such that primar server see secondary as another ip address (using NAT) and secondary server see primary as another ip address(using NAT)

Regards,

Gokhan Dedeler.
Re: Can I Configure Dataguard using Network Address translation ? [message #411432 is a reply to message #411343] Fri, 03 July 2009 09:56 Go to previous messageGo to next message
BlackSwan
Messages: 25041
Registered: January 2009
Location: SoCal
Senior Member
>Can i configure oracle dataguard between 2 server primary and standby with both having same physical ip address?

Can not/should NOT be done.

How will DB clients communicate with "correct" host?
Re: Can I Configure Dataguard using Network Address translation ? [message #411668 is a reply to message #411432] Mon, 06 July 2009 05:15 Go to previous messageGo to next message
babuknb
Messages: 1734
Registered: December 2005
Location: NJ
Senior Member

>>Can i configure oracle dataguard between 2 server primary and standby with both having same physical ip address?

One question; If primary and secondary both are same domain. Then IP Conflict should comes;

Or can you share with us why you want use same IP address??
Re: Can I Configure Dataguard using Network Address translation ? [message #411693 is a reply to message #411668] Mon, 06 July 2009 06:10 Go to previous messageGo to next message
dba4bank
Messages: 49
Registered: October 2007
Location: TURKEY
Member
Hi,

>>can you share with us why you want use same IP address??

We are planing to move all application servers and all databases to DRC side.
And Our applications is related with IP. But I think we have to use diffrent IP from Production.There is no way to do this with dataguard on the same domain.
Re: Can I Configure Dataguard using Network Address translation ? [message #411695 is a reply to message #411693] Mon, 06 July 2009 06:21 Go to previous messageGo to next message
babuknb
Messages: 1734
Registered: December 2005
Location: NJ
Senior Member


Thanks for the details.

>>There is no way to do this with dataguard on the same domain

Yes your correct.

Babu
Re: Can I Configure Dataguard using Network Address translation ? [message #419194 is a reply to message #411695] Thu, 20 August 2009 06:03 Go to previous message
dba4bank
Messages: 49
Registered: October 2007
Location: TURKEY
Member
Hi all,
I have forget one detail.We will use a nat IP to reach other database server.We have created listener on both server with same IP,port and sid.I can connect both side.I have concern about this issue.Is it dangerous for us and what kind of problem do I get ?


example;

Prod server physical IP= 146.0.0.1
standby server physical IP= 146.0.0.1
NAT IP to reach from prod to stby=133.0.0.1
NAT IP to reach from stby to prod=133.0.0.2

They are not on same domain.

Previous Topic: New Data Guard, logs not shipping across
Next Topic: Standby only using 1 standby log
Goto Forum:
  


Current Time: Tue Dec 06 08:49:09 CST 2016

Total time taken to generate the page: 0.07244 seconds